Controlling Air conditioner using Demand Enabled Response Device per AS/NZS 4755 and Iammeter

Here is a project I have been working on for a few months with my iammeters.

Its fully described here https://community.home-assistant.io/t/controlling-air-conditioner-using-demand-enabled-response-device-per-as-nzs-4755/481353/2

But briefly we use an iammeter usng Modbus TCP to send solar power to Home assistant

And a shelly UNI temperature sensor on my hot water to measure water temperature



And a mains powered ewelink 4 channel relay

To control the amount of power consumed by an air conditioner which is compliant with AS/ANZS 4755 Demand response enabled device on my air conditioner.



I had to measure the power consumptionn in watts of the air conditioner with a Shelly PM 1. Eventually, I'd like to replace that with an Iammeter as its a more robust device

    

But when its all back together, no one will know.

Enjoy!. Please feel fee to comment on the post I have linked to.

Thread Status
4
220
2
1
1

Sort replies by:

Thanks for your sharing.
This is the direct URL in the home assistant forum (It can be visited directly, without the login requirements of facebook. )

https://community.home-assistant.io/t/controlling-air-conditioner-using-demand-enabled-response-device-per-as-nzs-4755/481353/2


We are willing to provide the replacement of WEM3080 to be installed in the air conditioner.
Please contact us in our feedback system. https://www.iammeter.com/docs/feedback-and-notification

Thanks again.

Laoliu

Thanks very much! I can certainly use another iammeter for this project! 

I lost the original post before saving and forgot to include the Home assistant link on the second attempt. I've now updated the original post.

Looks like you are new here. Register for free, learn and contribute.