Installed WEM 3080 then updated as it said it was available. Did it successfully then lost wifi to the meter. What do I do now?

The firmware upgrade was most likely completed successfully.

If you upgraded from a firmware version below i.91 to the i.91 firmware series, please note that the previous Wi-Fi configuration will be cleared during this upgrade. The meter will return to AP mode and needs to be connected to your Wi-Fi again.

Please check the available Wi-Fi networks on your phone or computer and connect to the iMeter_xxxxxxxx Wi-Fi network broadcast by the meter. Then reconfigure the meter with your home Wi-Fi SSID and password.

After saving the settings, please allow the meter to connect to the Internet. It needs Internet access once after the upgrade to recover its SN information.

You can also find the firmware release notes here:

https://www.imeter.club/topic/11

If you cannot see the iMeter_xxxxxxxx Wi-Fi network, please let us know and we can help you check further.