New static dashboard: monitor power factor and reactive power in realtime (upload by mqtt)
Thanks for your comments
If you have any thoughts about new dashboard, please share them here .
Or you can try to make it directly by https://chatgpt.com/g/g-68e9cc3b83408191901b66b524ba5373-iammeter-assistant
Nice. It even works with net metering being enabled.
Ou, guess I was wrong... is this only a demo? Does not appear to be using the meter installed at my home. Or powers are totally off...
Of course, this is not just a demo.
All dashboards available here (https://iammeter.github.io/appstore/site-code/) can be used by all IAMMETER customers.
However, there are some prerequisites:
- “Local” tag: The energy meter must be accessible within the same WLAN as the device (e.g., your laptop) used to open the dashboard. You will need to enter the meter’s local IP address.
- “MQTT or Remote” tag: A local IP is not required. You only need to replace the MQTT username and password with your own credentials (just upgrade it and these can be inputted directly in setting tab).( How to get the mqtt credentials from IAMMETER-Cloud ).