Import Energy no longer getting updated

Hi,

I have installed WEM3080 and have been using it for over a year now, but recently I noticed the Import Energy is no longer getting updated. All other values like Voltage/Current/Power/Export Energy still updates correctly. I have updated firmware version to i.91.062T4 but still no luck. Anyway I could fix this? Thanks.

Thread Status
7
247
2
1
0

Sort replies by:

Sorry, this issue is exactly the one described below:

https://imeter.club/topic/576
The bug occurs in the metering module, not the Wi-Fi module, so you will need to install a bug-fix firmware to correct the metering module.

Please upgrade to the bug-fix version first (https://imeter.club/topic/576).

After updating, if you see the imported energy value increasing normally, it means the bug has been fixed.
Once confirmed, you may upgrade to the latest firmware if you prefer.

We sincerely apologize for this situation. We tried to notify all affected users by email and system feedback earlier, but clearly the information did not reach everyone.

Thanks for the reply, I have updated the firmware, but after that, it cannot connect to WiFi. I can see the RUN indicator shown as green, but the WiFi indicator is off. I tried turn off my router but the meter's own WiFi isn't showing up. Any other way I could do for now?

Sorry, this issue is exactly the one described below:https://imeter.club/topic/576The bug occurs in the metering module, not the Wi-Fi module, so you will need to install a bug-fix firmware to correct the metering module.Please upgrade to the bug-fix version first (https://imeter.club/topic/576).After updating, if you see the imported energy value increasing normally, it means the bug has been fixed.Once confirmed, you may upgrade to the latest firmware if you prefer.We sincerely apologize for t

Whether the RUN LED flashed every 1 second?


No, it's a steady green, no blinking.

Whether the RUN LED flashed every 1 second?

After contact support and power cycling the device, it is working again.

Thanks for your patience.

I forget it require power cycle after the downgrade operation.

Looks like you are new here. Register for free, learn and contribute.