I am running through the initial setup of my WEM3080. I have used by app and web. I get the same result both times. I access the device. See all of the interfaces and settings. Go to assign my wifi 2.4ghz SSID and password. The device sits for a second (with the 20 sec countdown), and then nothing. When I again try to connect to the local iMeter SSID either on my mobile or my laptop, the connection starts then drops. It shows back up a few seconds later. Over and over. I can not successfully get the device to retain my SSID for my home or keep a solid connection to check if the settings are correct. 


Thoughts?

Thread Status
1
59
2
0
0

Sort replies by:

Let us only use the web do the wifi configuration for testing

https://www.iammeter.com/quickstart/wem3080t-quickstart#32-set-up-in-the-browser

Please let me know 

1 what is the status of the Wi-Fi LED after you set the wifi credential?

2 After you click "save” when you set the wifi credential by a web browser, it prompts that the configuration is successful, yes?

3 when you connect the ap ,please visit 

http://11.11.11.1/scan.html and give me a snapshot ,like below pictures

please also let me know which "SSID" is the ap name of your WLAN  and what is its "Signal" value.

Looks like you are new here. Register for free, learn and contribute.