Different grid connection tariffs

Good day,


I have a 3phase Iammeter, connected to the following phases at home:

A: Grid connection 1

B: Grid connection 2 (hot water)

C: Load connection

My electricity supplier charges different tariffs for each grid connection (fixed tariff for both, but a lower tariff for the hot water system).

The IAMMETER app currently only alows for a single tariff to be applied to all grid connections, which results in my billing estimate on the app to be inaccurate. 

Please consider adding the option of applying a different tariff to multiple grid connections.

Thread Status
1
46
2
0
0

Sort replies by:

Hi:

Apologies, but the current billing system does not support this template. The system is designed to operate with only one billing template per site, so it cannot handle the scenario where one site has two grid connections with different tariffs.

I have reported this issue to our development team. However, addressing it requires significant changes to the underlying code, which will take considerable time for evaluation and development.

In the meantime, a possible workaround is to use a single-phase meter at a new "site" to measure the grid dedicated to hot water. Set the fixed tariff for hot water at this new site. Adjust the corresponding phase of the three-phase meter, used for measuring hot water, from "grid" to "load."

You can view the total results in the "virtual site" as follows:https://www.iammeter.com/docs/virtual-site

Looks like you are new here. Register for free, learn and contribute.