Hi,

Since the last 2 hours the app is stuck at 11:45 am (my local time) and is not adding exported data 

However, the live view (overview) is working on the browser but that too shows 11:45 am as the last update and then refreshes to the correct time and data but if I close the browser and reopen, it again shows 11:45 as the last update time but after 12 secs starts to refresh but nothing being added to daily hour bars.

Please check the server, many thanks

(I have 2 3080 3 phase meters installed, one on the grid and one on my 3 phase inv. Both are acting the same which makes me think this is your server issue)

Thread Status
4
153
2
2
0

Sort replies by:

(Im on firmware i.75.98.1 on both meters)

Thank you Jack for your reply to my email.

It's working fine now.

Appreciate the quick resolution, many thanks.

Hi:

This problem is caused by the upgrade of yesterday.
It affects some of the clients that upload data to IAMMETER`s MQTT broker.
Please note, the IAMMETER MQTT broker is not a standard service, its original intention is just to facilitate users to test the MQTT of the energy meter .
Recommend switching back to the "Cloud" mode after the mqtt testing is complete.

If you want to subscribe to the data from a mqtt broker and also upload data to IAMEMTER`s cloud ,please try IAMMTER-docker ,it also provides a function of MQTT-broker.

https://www.iammeter.com/docs/docker-advanced#mqtt

Appreciate your reply. It's working fine now. 

The only reason I use mqqt is because I get fast upload intervals while the cloud refreshes after 1 min.

But I dont mind switching to cloud if required in the future.

Many thanks

Hi:This problem is caused by the upgrade of yesterday.It affects some of the clients that upload data to IAMMETER`s MQTT broker.Please note, the IAMMETER MQTT broker is not a standard service, its original intention is just to facilitate users to test the MQTT of the energy meter .Recommend switching back to the "Cloud" mode after the mqtt testing is complete.If you want to subscribe to the data from a mqtt broker and also upload data to IAMEMTER`s cloud ,please try IAMMTER-docker ,it also provi
Looks like you are new here. Register for free, learn and contribute.