Hi, 

Rarely I have the issue that my solar array triggers its circuit breaker and all power of the array is lost. I'd like to set up a trigger that monitors that power production of the array and alerts if there is no power production after say 14 hours (allowing for night time). 

Is this possible and how?

Thread Status
3
115
3
1
0

Sort replies by:

Hi:

Yes, the current function can not resolve this issue.

https://www.iammeter.com/docs/alert-and-notification#trigger-setting

Therefore, we plan to add a time range parameter in this trigger setting.
After this feature is upgraded, you can set a power threshold in the daytime, and select the level trigger mode.
Then the system will remind you by email when the inverter output is less than normal in the daytime.


Hi,

We have updated this feature, please try to see if it meets your requirements.

Hi, Rarely I have the issue that my solar array triggers its circuit breaker and all power of the array is lost. I'd like to set up a trigger that monitors that power production of the array and alerts if there is no power production after say 14 hours (allowing for night time). Is this possible and how?

Hi, Rarely I have the issue that my solar array triggers its circuit breaker and all power of the array is lost. I'd like to set up a trigger that monitors that power production of the array and alerts if there is no power production after say 14 hours (allowing for night time). Is this possible and how?
Looks like you are new here. Register for free, learn and contribute.