Comprehensive report, Active power history

How could the meter in the active power history in comprehensive report be set?


Seem like it only show 2 comparison between first and 2nd phase (mine use solar so I connect first and third, the 2nd is not shown)



Regards

Thread Status
5
314
3
0
0

Sort replies by:

Sorry, I do not understand this question clearly. please give us more information, thanks.

How could the meter in the active power history in comprehensive report be set?Seem like it only show 2 comparison between first and 2nd phase (mine use solar so I connect first and third, the 2nd is not shown)Regards

Hi,

You have three phase system. To see what do you want you have to have two meters WEM3080T.
On one meter you can see only how much you export to on grid or how much import from there.

If you will have two meters need to be properly set.

Hi, 

Please check if you set your meter in "net metering mode", if so ,this is the reason.

In "net metering mode" , the meter will count the energy by the algebraic sum power of each phase. So there is only one import/export energy in the graph, this import/export energy is accumulated by the algebraic sum of the 3 phase power.

Hi, 

Here is what I see


But actually I have 2 meters which is A and C set as picture. the B is not connected


So I'd like to see the comparison between A and C, but I'm not sure where to configure the graph in this comprehensive report.

Looks like you are new here. Register for free, learn and contribute.