Meters showing correct voltage and amperes but not showing the correct correct watts.
Hi:
Please let me know ,how do you judge the power reading is not correct
Thanks for your reply.
If you multiply volts of phase A of (MTR ROOM 79) with the Amps on the same phase, 234.5Volts X 11.31Amps =2652.195Watts, Where as in the attached pic it shows 1327Watts.
This is how i am reaching the conclusion that the data shown for Phase A is not correct.
Regards,
Ather Mahmood.
Lahore, Pakistan.
Hi
The power display here is the active power
active power = U*I* power factor.
Please search the power factor definition
Attached is the PF data for that day.
Can you please let me know how can I correct or disable pf readings
power factor = active power/U*I
Power factor is an expression of energy efficiency. It is usually expressed as a percentage—and the lower the percentage, the less efficient power usage is.
This is the power factor explanation,
https://www.fluke.com/en-us/learn/blog/power-quality/power-factor-formula
The power factor is just a measurement result, and can not be disabled, please try to understand what is the power factor before your continue question.