Hi,

I have 2 3080's installed, one on a 3 phase inverter and one on the grid.

Even yesterday both were updating every 12 seconds as I had set them at N=1 

They were updating data (auto refreshing) every 12 seconds for many months until today, now I have to manually refresh them every minute.

Please keep in mind all settings are valid and mqtt://mqtt.iammeter.com:1883 is the tcp address. Both on latest firmware. NEM also enabled on just the grid meter.

I would appreciate if someone can advice why this is happening today to both meters after many months of successful 12 sec auto refreshes.

Appreciate  it,

Usman

Thread Status
4
156
2
3
1

Sort replies by:

Hi,

I think what you mentioned is about this page.


Already fixed!

BR

Hi!,

Yes this page where we view the data. 

It's working fine since yesterday.

I upgraded both meters to 2.75.92 just now and both are working fine and updating the (above) page every 12 secs as I have set it to 12.

Many thanks and keep up the awesome work!

Usman

Hi,I think what you mentioned is about this page.Already fixed!BR

Hi!,

Yes the above page where we view the data, refreshed every 12 secs in my case.

It's working fine since yesterday.

I upgraded both meters to 2.75.92 just now and both are working fine and updating the (above) page every 12 secs as I have set it to 12.

Many thanks and keep up the awesome work!

Usman

Hi, 

"They were updating data (auto-refreshing) every 12 seconds for many months until today, now I have to manually refresh them every minute."


Please let me know your question clearly.
Whether the problem regarding the device uploading frequency or the web page refresh?
If the problem is regarded to the refresh of the webpage, please let me know the specific page.

Hi,I have 2 3080's installed, one on a 3 phase inverter and one on the grid.Even yesterday both were updating every 12 seconds as I had set them at N=1 They were updating data (auto refreshing) every 12 seconds for many months until today, now I have to manually refresh them every minute.Please keep in mind all settings are valid and mqtt://mqtt.iammeter.com:1883 is the tcp address. Both on latest firmware. NEM also enabled on just the grid meter.I would appreciate if someone can advic
Looks like you are new here. Register for free, learn and contribute.